|
MiCOM P632
Positive- and negative-sequence
currents
|
|
|
|
MiCOM P632
Positive- and negative-sequence
currents
|
|
The positive- and negative-sequence current measured values of all ends (primary and per unit values) are determined continuously and displayed as measured operating data:
|
End a |
End b |
|---|---|
|
MAIN: Current Ineg a prim. (005 125) |
MAIN: Current Ineg b prim. (005 129) |
|
MAIN: Current Ipos a prim. (005 127) |
MAIN: Current Ipos b prim. (005 134) |
|
MAIN: Current Ineg a p.u. (005 126) |
MAIN: Current Ineg b p.u. (005 130) |
|
MAIN: Current Ipos a p.u. (005 128) |
MAIN: Current Ipos b p.u. (005 135) |
When the CB's contacts are open, it is also possible to force to zero the setting of small positive- and negative-sequence current measured values if such measured values are below additionally created settable thresholds.
|
Measured value relating to positive-sequence current |
MAIN: Meas.value rel. Ipos (011 058) |
|
Measured value relating to negative-sequence current |
MAIN: Meas.value rel. Ineg (011 048) |