Canceling a Device Function

The following conditions must be met before a P632 function can be cancelled or removed:

▪	The P632 function must be disabled.
▪	None of the functions of the P632 function to be cancelled can be assigned to a binary input.
▪	None of the signals of the P632 function can be assigned to a binary output or an LED indicator.
▪	None of the functions of the P632 function to be cancelled may be selected in a list parameter setting.

If the above conditions are met, proceed through the “Configuration” branch of the menu tree to access the setting relevant for the P632 function to be cancelled. If, for example, the “LIMIT” function group is to be cancelled, the setting of LIMIT: Function group LIMIT is set to Without. To re-include the “LIMIT” function in the P632 configuration, the same setting is accessed and its value is changed to With.

The P632 function to which a setting, a signal, or a measured value belongs is defined by the function group designation (example: “LIMIT”). In the following description of the P632 functions, it is presumed that the corresponding P632 function is included in the configuration.