|
MiCOM P632
Start of Fault Recording
|
|
|
|
MiCOM P632
Start of Fault Recording
|
|
A fault exists and fault recording begins if at least one of the following signals is present:
| ▪ |
MAIN: General starting |
| ▪ |
MAIN: Gen. trip signal 1 |
| ▪ |
MAIN: Gen. trip signal 2 |
| ▪ |
FT_RC: Trigger |
| ▪ |
FT_RC: Id> triggered |
| ▪ |
FT_RC: IR> triggered |
In addition fault recording may also be started manually using setting parameters or externally through an appropriately configured binary signal input.