MiCOM P632
Changing and Displaying the L/R Password
graphics/symbols/xh_bw.gif graphics/symbols/xh_fw.gif

In order to enable local control on devices fitted with the graphic display HMI (ordering option) the L/R password has to be entered.

 

Control Step / Description

Control Action

Display

Step 0

In the menu tree “Par/Conf/LOC”, select the LOC: Password L/R setting.
 
 
Par/Conf/LOC
Password L/R
********

Step 1

Press the ENTER key. Eight asterisks (*) appear in the fourth line of the display.
graphics/xhelptemp/svg2png/svg_0255.png
 
Par/Conf/LOC
Password L/R
********
********

Step 2

Press the “left”, “right”, “up” and “down” keys to enter the valid general password. The display will change as shown in the column on the right.
graphics/xhelptemp/svg2png/svg_0259.png
 
Par/Conf/LOC
Password L/R
********
*
 
 
graphics/xhelptemp/svg2png/svg_0260.png
 
Par/Conf/LOC
Password L/R
********
 *
 
 
graphics/xhelptemp/svg2png/svg_0257.png
 
Par/Conf/LOC
Password L/R
********
  *
 
 
graphics/xhelptemp/svg2png/svg_0258.png
 
Par/Conf/LOC
Password L/R
********
   *

Step 3

Now press the enter key. The red LED indicator labeled EDIT MODE will be illuminated. The current Password L/R will appear in the third line.
graphics/xhelptemp/svg2png/svg_0255.png
graphics/xhelptemp/svg2png/svg_0261.png
 
Par/Conf/LOC
Password L/R
1423

Step 4

Enter the new password, which in this example is done by pressing the “up” key followed by the “down” key.
graphics/xhelptemp/svg2png/svg_0257.png
 
Par/Conf/LOC
Password L/R
*
 
 
graphics/xhelptemp/svg2png/svg_0258.png
 
Par/Conf/LOC
Password L/R
**

Step 5

Press the enter key again. Asterisks appear in the third line, and a cursor (underscore) in the fourth line prompts the user to enter the new Password L/R again.
graphics/xhelptemp/svg2png/svg_0255.png
graphics/xhelptemp/svg2png/svg_0261.png
 
Par/Conf/LOC
Password L/R
**
_

Step 6

Re-enter the new Password L/R.
graphics/xhelptemp/svg2png/svg_0257.png
 
Par/Conf/LOC
Password L/R
**
*
 
 
graphics/xhelptemp/svg2png/svg_0258.png
 
Par/Conf/LOC
Password L/R
**
**

Step 7a

Press the ENTER key again. If the new Password L/R has been re-entered correctly, the red LED indicator labeled EDIT MODE will be extinguished and the display appears as shown on the right. The new Password L/R is now valid.
graphics/xhelptemp/svg2png/svg_0255.png
 
Par/Conf/LOC
Password L/R
********

Step 7b

If the new Password L/R has been re-entered incorrectly, the red LED indicator labeled EDIT MODE remains illuminated and the display shown on the right hand side appears. The new Password L/R needs to be re-entered. It is also possible to cancel the change of the Password L/R by pressing the CLEAR key (see Step 8).
graphics/xhelptemp/svg2png/svg_0261.png
 
Par/Conf/LOC
Password L/R
**
_

Step 8

The change of the Password L/R can be canceled at any time before Step 7 by pressing the CLEAR key. If this is done, the original Password L/R continues to be valid.
graphics/xhelptemp/svg2png/svg_0256.png
 
Par/Conf/LOC
Password L/R
********