MiCOM P632
Password-Protected Control Actions
graphics/symbols/xh_bw.gif graphics/symbols/xh_fw.gif

Certain actions from the local control panel such as a manual trip command for testing purposes can only be carried out by entering a password so as to prevent unwanted output even though the global change-enabling function has been activated (see section “Change-Enabling Function”).

This setup is designed to prevent accidental output and applies even when the global change-enabling function has been activated. The password consists of a pre-defined sequential key combination entered within a specific time interval. If the password has been changed by the user (see section “Changing the Password”), the following description will apply accordingly.

 

Control Step / Description

Control Action

Display

Step 0

In the menu tree “Oper/CtrlTest/MAIN”, select the parameter MAIN: Man. trip cmd. USER.
 
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute

Step 1

Press the ENTER key. Eight asterisks (*) appear in the fourth line of the display.
graphics/xhelptemp/svg2png/svg_0255.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute
********

Step 2

Press the following keys in sequence:

“Left”
graphics/xhelptemp/svg2png/svg_0259.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute
*
 

“Right”
graphics/xhelptemp/svg2png/svg_0260.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute
 *
 

“Up”
graphics/xhelptemp/svg2png/svg_0257.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute
  *
 

“Down”

The display will change as shown in the column on the right.
graphics/xhelptemp/svg2png/svg_0258.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute
   *
 

Now press the enter key. The LED indicator labeled EDIT MODE will light up. This indicates that the setting can now be changed by pressing the “up” or “down” keys.
graphics/xhelptemp/svg2png/svg_0255.png
graphics/xhelptemp/svg2png/svg_0261.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute

Step 3

Change the setting to execute.
graphics/xhelptemp/svg2png/svg_0262.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Execute

Step 4

Press the enter key again. The LED indicator labeled EDIT MODE will go out. The unit will execute the command.
graphics/xhelptemp/svg2png/svg_0255.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute

Step 5

As long as the LED indicator labeled EDIT MODE is on, the control action can be terminated by pressing the CLEAR key. The LED indicator labeled EDIT MODE will be extinguished.
graphics/xhelptemp/svg2png/svg_0256.png
 
Oper/CtrlTest/MAIN
Man. trip cmd. USER
Don't execute