MiCOM P632
Changing Between Display Levels
graphics/symbols/xh_bw.gif graphics/symbols/xh_fw.gif
Jumping from Menu Tree Level to Panel Level

After start-up of the device, the menu tree level is displayed.

 

Control Step / Description

Control Action

Display

Step 0

From the Menu Tree Level, the user can jump to the Panel Level from any position within the menu tree.
 
 
Par/Func/Glob/MAIN
Device on-line
No (=off)

Step 1

First press the “up” key and hold it down while pressing the CLEAR key.

Note: It is important to press the “up” key first and release it last in order to avoid unintentional resetting of stored data.
graphics/xhelptemp/svg2png/svg_0257.png

+

graphics/xhelptemp/svg2png/svg_0256.png
 
Voltage A-B prim.
     20.7 kV
Voltage B-C prim.
     20.6 kV
Jumping from Panel Level to Menu Tree Level
 

Control Step / Description

Control Action

Display

Step 0

Example of a Measured Value Panel.
 
 
Voltage A-B prim.
     20.7 kV
Voltage B-C prim.
     20.6 kV

Step 1

Press the Enter key to go from the Panel Level to the Menu Tree Level.
graphics/xhelptemp/svg2png/svg_0255.png
 
P632

After the set return time has elapsed (setting in menu tree: “Par/Conf/LOC”), the display will automatically switch to the Panel level if a Measured Value Panel has been configured.